Industrial Chic™ The Juggler Necklace

The Juggler Necklace
The Juggler Necklace

Designed by Mary Feliciano for Horizon Group USA

  • Take your chain and count five links up from your large dapped diamond shaped link. Using your chain nose pliers open the jump ring on the “S” closure part of your clasp and connect the ring through both links at the fold.
  • Attach the second half of your clasp through the two links directly above your second large dapped diamond shaped link. (Now called “Diamond Link #2).
  • There should be about 15-inches of chain hanging off of diamond link #2; using your chain nose pliers cut 11-inches of chain off of the hanging chain.
  • Cut the 10-inches of chain into three additional pieces measuring: 2-inches, 3-inches and 4-inches of chain.
  • Using your chain nose pliers, reattach the additional chain through a jump ring and attach the jump ring to the two links directly above the second diamond link.
  • Using your chain nose pliers, attach charm MKP19545-123 to the top of diamond link #2.
  • Using your chain nose pliers, attach pendant MKP18046-101 through the last link on your 2-inch chain and also through diamond link #2.
  • Using your chain nose pliers, attach charm MKP19543-123 through diamond link #2. And through links on your 9-inch chain and your 4-inch chain.
  • Using your chain nose pliers, attach charm MKP19545-123 to the final link on the 3-inch chain.
  • Using your chain nose pliers, attach charm MKP19545-123 through pendant MKP18046-101 and through a link on your 4-inch chain.
  • Using your chain nose pliers attach link () to the final link on your 4-inch chain.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>